|
Dynojet Power Commanders |
Power On Command!!
|
Introducing
the Dynojet Power Commander - The perfect tuning tool for your Fuel Injected
Motorcycle. |
|
 |
 |
Dynojet Power Commander Kit Features:
*Fuel curve adjustment
with LED display on faceplate for fine-tuning
*CD with instructional videos, software and PC link cable which allows 3D adjustment
of the fuel curve
*Simple, 5-minute installation
*No wiring modifications required - OEM style plugs supplied
*No permanent changes made to your stock ECU
*Fully adjustable via face plate buttons or PC computer with the Dynojet Control
Center Software
Maximum results in the minimum time provide: Crisper throttle response, increased horsepower & optimum fuel consumption. There is a huge selection of maps available to download from www.powercommander.com to suit various exhaust systems / air filters etc. Although for the very best results we would recommend a custom mapping session on a load control (i.e. Dynojet model 250) dyno.
NOTE:
ONLY THE LATEST SPECIFICATION ‘PCIII USB’ MODELS
ARE COMPATIBLE WITH THE NEW DYNOJET IGNITION MODULES & QUICKSHIFTERS. SERIAL
PORT MODELS (PCII, PCIII SERIAL AND PCIIIR WILL NOT ACCEPT THE ADD ON MODULES)
Price & Application lists 2009:
Power
Commanders & Accessories 2009
(Adobe
PDF file)
 |
CLICK HERE to download Adobe Acrobat Reader, it's FREE. If you do not already have this program you will need to install it in order to view the Power Commander List |
PLEASE
NOTE: Some Power Commanders for 2008/9 models are still in development!
Please
call us on 01753 730043 for up to the minute information...
Oxygen Sensor Eliminator Kits - On some fuel injected bikes the ECU is designed to read the Oxygen sensor under certain conditions and temporarily change the air/fuel ratio. This ‘closed loop circuit’ has a very limited operating range, which is only in effect while holding a steady speed at certain rpm's and throttle positions. In this limited area, the stock system (with or without the Power Commander) will gradually and temporarily lean out the air fuel ratio in an attempt to achieve an air/fuel ratio of 14.7:1 (stochiometric). Oxygen sensors can often be disconnected but this will trip the F.I. dash warning light. Fitting a Dynojet O2 sensor eliminator into the bike’s wiring loom will prevent this happening.
O2 Sensor Controllers - On the ‘04 and onwards Aprilia Mille you will either need have the ECU set to “RACE MODE” (using the dealer tool) or use an 02 sensor controller. An O2 sensor controller may also be required on some late Triumph models (check on www.powercommander.com for more details)
CUSTOM POWER COMMANDER MAPPING AT PDQ
PDQ is an Official Dynojet Power Commander Tuning Center. This means we can optimize the fuel and ignition mapping for your motorcycle with a Power Commander custom mapping session. Our new custom built dyno cell houses a state-of-the-art Dynojet Model 250 Load-Control Dynamometer and real-time Air/Fuel Ratio module.
The Load Control software provides the ability to control vehicle RPM or speed at any throttle position, thereby enabling our operator to optimise fuelling throughout the entire rev range. So whether it's performance of economy you desire, we will be happy to discuss your needs.
As well as regular performance tuning work with Dynojet Kits, Power Commanders and K&N products etc. the Dynamometer allows us to quickly and accurately diagnose a wide range of running problems, by simulating road or track testing inside the dyno room.
Please feel free to call us on 01753 730043 for more information on our wide range of dyno testing and tuning services. We have decades of professional dyno experience and a modern, clean, well equipped, purpose built dyno testing center.
 |
 |
Various Power Commander maps are available to download free of charge from www.powercommander.com - but please make sure you download the correct maps for your market (i.e. 'European Model' if you live in the UK)!!!
05/01/09
